Ohlins TTXm.2 Coil Shock - Standard

Product Description

Improved bottom out performance
The new TTX22m.2 benefits from improved bottom out performance courtesy of a newly designed bump rubber, as well as the cup it sits in. This significantly improves mid to end stroke control as a result of earlier engagement and more consistent and predictable support.

The new bump rubber in combination with the cup it sits in, acts as a second spring, loading and releasing energy to ensure the rider returns back into position after a heavy compression in a quick and controlled manner. Overall, the spring curve of the shock will improve performance for less progressive bikes that need more end stroke support. The new design also has the added effect of lowering the risk of a hard bottom out that may affect handling.

Easier stroke adjustment
Changing spring and stroke is an easy operation on the TTX22m.2. This is achieved by adding or removing 2.5 mm washers under the bump rubber cup. No special tools are required, nor is shock disassembly needed to perform the operation. The spring, meanwhile, can be changed by simply loosening the preload and removing the spring seat lock ring. The spring can then slide over the end eye, making it easy to optimize sag and shock performance.

Wider adjustment range
The updated shock’s blue trail high-speed compression valve now provides a wider adjustment range. Importantly, this gives the rider more distinct alternatives to choose between when customizing setup. This new wider range also adds support in the pedal mode, making the bike a more efficient climber. The golden DH compression valve retains the same adjustment range as the original, which is already perfectly optimized for gravity riding.

Specifications;

• TTX-technology
• Specifically designed for trail and downhill use
• 250 length with golden DH compression valve. All other lengths with blue trail valve
• Available in metric lengths/strokes
• Standard side-by-side cylinder head
• 210x55/52.5/50/47.5mm
• 230x65/62.5/60/57.5mm
• 250x75/72.5/70/67.5mm
• Possible to simply adjust stroke with the three 2.5 mm spacers included in the box
• Suitable for our lightweight springs with 4 Nm/23 lbs increments
• External, three level high-speed compression adjustment
• External, 16 click low-speed compression adjustment rebound damping adjustment
• External, seven click rebound adjustment
• Weight: 486g (for a shock Trunnion 205x65)

View other products in Ohlins »