BikeYoke
Grid
List
BikeYoke Triggy
*THIS IS THE LEVER AND CABLE ONLY - PLEASE ORDER CLAMPS SEPARATELY
BikeYoke Triggy - Alpha
*THIS IS THE LEVER AND CABLE ONLY - PLEASE ORDER CLAMPS SEPERATELY
BikeYoke 2X-Remote
Bike Yoke 2 By Adaptor
Splits Clamp
Our clever Splits clamp attaches our Triggy directly to the handlebar.
Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on!
A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look.
By the way: SRAM shifter triggers can also also be...
I-Spec B Adaptor
This adapter allows you to mount our Triggys directly to a Shimano brake lever, which features an I-Spec-B standard and thus save a clamp on the handlebar.
This provides a clean cockpit and a fantastic look.
Moreover, many other remotes and shifters that offer a SRAM Matchmaker Standard can be combined with the I-Spec adapters (see compatibility).
I-Spec B adapters have a flip-flop design and can...
I-Spec EV adapter
This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches your Triggy directly to a Shimano I-Spec EV brake and it saves an extra clamp on the handlebars.
You can also use it to mate SRAM triggers or other remotes with your I-Spec EV Shimano brake.
Our BikeYoke I-Spec EV adapter can be used for either the left or the right Shimano brake lever and you can get them...
BikeYoke Poddy
Mount your SRAM Pod Controller directly to your brake levers for a perfect ergonomic position and a clean look on your cockpit.
The Poddy can be fitted to any brake lever that features a SRAM Matchmaker (MMX) interface, which is offered as an adapter by most brake manufacturers - Trickstuff, Hope, Magura, Formular, Shimano (Bikeyoke), to name but a few.
DeHy for Reverb Stealth A1/A2 (MY 2011-2016)
Remote and adaptor sold seperately
DeHy for Reverb Stealth B1 (MY 2017-2019)
Remote and adaptor sold seperately
DeHy for Reverb Stealth C1 (MY 2020-)
Remote and adaptor sold seperately
BikeYoke REVIVE/ DIVINE 30.9/31.6 - Dropper Service Kit
Revive 100hr service for 30.9/ 31.6 seatposts
BikeYoke REVIVE MAX - Dropper Service Kit
BikeYoke REVIVE MAX - Dropper Service Kit
BikeYoke DIVINE SL/ RASCAL - Dropper Service Kit
BikeYoke DIVINE SL/ RASCAL - Dropper Service Kit
BikeYoke REVIVE 272 Service Kit
Service kit for 100hr Service (readjusting play and replacing wiper).
Includes:
1x Wiper
6x Glide pin
1x Lower bushing
1x Foam ring
1x C-clip
1x Upper bushing
See below for installation video
BikeYoke Dropper - O-Ring Kit
BikeYoke REVIVE/ DIVINE - Dropper O-Ring Kit
REVIVE/ MAX/ DIVINE - Cable Clamp
Cable clamp to actuate our REVIVE and DIVINE posts.
DIVINE SL / RASCAL - Connector Kit
Includes:
1x Special outer housing endcap for DIVINE SL/Rascal
1x actuating plunger
1x connector nut
DIVINE - Spacer Set
Includes:
4x DIVINE 5mm Spacer for internal travel adjust
Fits:
DIVINE
Attention: Does not fit REVIVE or REVIVE MAX!
REVIVE - Travel Spacer Set (8mm Piston Rod)
Includes:
4x spacers for travel adjustment
Fits:
REVIVE
REVIVE MAX
DIVINE
DIVINE SL / Rascal
Note:The video under the Video tab shows the installation process on a DIVINE. The REVIVE has a slightly different internal structure, but the installation is performed in the same way: Spacers must be clipped onto the shaft between the piston and seal head.When using more than 4 spacers, oil...
REVIVE - Quick Reset Lever
Attaches to your Reset Hex Slot instead of the 4mm Allen Key, secured by an O-ring (inlcuded).No more need to grab your 4mm Allen Key.Insert the Quick Reset Lever carefully and completely into the 4mm Allen key slot to not damage the o-ring and to make sure it is secured properly. You can easily engage it with a pull of your finger.Fits:
REVIVE
REVIVE MAX
Titanium Clamping Hardware
REVIVE - Titanium Clamping Hardware
BikeYoke Valve Adaptor
Valve adapter.
Allows for easier access to your dropper valve for shock-pumps with short valve heads. Also works with any other Schrader-valved fork/shock/post.
BikeYoke Dropper Goo - Suspension Grease - 30ml
BikeYoke Dropper Goo - suspension grease - 30ml
BikeYoke Sanguine - Hydraulic Oil - 250ml
BikeYoke Sanguine - hydraulic oil - 250ml
BikeYoke Sagma
BikeYoke Sagma
130mm
142mm Black, Blue, Pink, Orange and Lime Green .... (it's very bright!)
Squeezy
We never just want to make something, that´s already there. We want to make something different, something better.Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light with 7.9g @ 34.9/35mm.
Unlike other seat clamps, Squeezy has a collarless design.
Collars are basically just an installation aid, to prevent the clamp from sliding down the seat tube,...
Willy
Don't forget your rubbers!
Creaking is the worst and so it is not wonder, that you can see old inner tubes wrapped and zip-tied to seatposts and seattubes. This helps keep dirt and mud outside your frame, when you riding in muddy conditions. Surely, you´ve noticed your seat-clamp covered in loads of mud after a wet ride.
Willy does not more, but also not less than the DIY old-tube-zip-tie-solution,...